ICOM IC-910H

VHF/UHF All Mode Transceiver

The New Dimension in the VHF/UHF World!

ICOM IC-910H

100W of stable output power.

A powerful 100W* of output power is provided by the newly designed power amplifier circuit, which employs bipolar transistors in parallel. The combination of the aluminum die-cast chassis and effective cooling fan ensures stable output for continuous operation.

* 75W on 430MHz and 10W on 1200MHz.

High performance receiver.

The IC-910H offers 0.11µV of high sensitivity ( at 10db S/N on SSB, CW mode), while the image and spurious responses are minimized for good signal fidelity. Used with the optional preamplifiers for each band, indispensable for obtaining weak signals in DX or satelite communication, you will experience top class receiving characteristics in the VHF/UHF bands.

Ready-to-install 1200MHz BAND UNIT.

By installing the optional UX-910 ( 1200MHz BAND UNIT). The IC-910H becomes an all mode tri-band transceiver. You can also enjoy cross band and full duplex operation. Measuring only 241(w)x94(h)x239(d) mm, and weighting 4.5kg ( without UX-910), its compactness and lightweight is convenient for field operation.

9600bps packet operation.

The IC-910H has two data sockets for simultaneous two band packet communications. 
Setting of the packet communication can be made easily in the set mode.

Satellite communication.

In the satellite mode, the down/up link frequencies are displayed on the MAIN and SUB band respectively. Reverse/normal tracking and doppler shift compensation are standard, and 10 satellite memory channels store down/up link frequencies and operating mode.

Additional features.

•All receiver functions, including IF shift, sweep, noise blanker, RF attenuator, also work in the •SUB band.
•The sweep function observes conditions around the set frequency.
•4 types of scanning are activated on each band independently.
•The memory pad stores the operating frequencies and modes temporarily.
•Electronic keyer with a dot/dash ratio control is built-in.
•FM-narrow mode receivable (except 1200MHz band).
•50 CTCSS tone encoder and one touch repeater function.
•Optional UT-106 ( DSP UNIT) available.
•CI-V capability for PC control.