ICOM IC-AG2400

2400MHz

Receive Converter

ICOM IC-AG2400

Since the succesful launch of the AO-40 amateur radio satellite, many amateur fans will have a renewed interest in satellite operation.

The AG-2400 is a downlink receive converter, which converts a 2400MHz RF signal to a 144MHz IF signal. Used with the IC-910H, the AG-2400 allows US mode (Uplink/Downlink: 430MHz/2400MHz) operation. If the optional UX-910 is installed 
to the IC-910H, LS mode (1200MHz/2400MHz) operation is also possible.

The AG-2400 coupled with the IC-910H will provide new excitement in the world of satellite operation.

Built-in low noise amplifier (LNA) and suppression filter.

The LNA provides the ideal noise figure (NF)and conversion gain balance, perfect for satellite operation.The suppression filter reduces blocking from the uplink frequency. This allows for close set up between the uplink and downlink antennas (50cm at the minimum).

Water resistant construction for installation outside under an antenna.

Protect circuit prevents damage to the AG-2400 from an accidental transmission.

Specifications.

•Input frequency : 2400-2402MHz
•Output frequency : 144-146MHz
•Conversion gain : More than 25dB
•Total noise figure : Less than 1.5dB
•Antenna Impedance : 50Ω (Type-N)
•Power supply requirments : 13.8V DC ±15%

•( Power supplied via a coaxial cable from IC-910H)
•Current drain : 200mA ( approx.)
•Dimensions : 172(W)x69.5(H)x230(D) mm.
•Weight :1.18kg