|
ICOM IC-E92D
Dual Band Transceiver
|
| |
|
ICOM IC-E92D |
| |
|
Optional GPS
speaker-microphone, HM-175GPS.
Used with the newly designed
GPS speaker-microphone, HM-175GPS, the IC-E92D shows
your position data on the display and offers a position
reporting function in DV mode. The IC-E92D shows the
direction to a memory position or to a received D-STAR
station with a compass like display needle. In addition,
the GPS-A mode assists in easy D-PRS mode operation.
|
| |
|
IPX7 submersible construction.
The IC-E92D and HM-175GPS
provide superior waterproof protection equivalent to
IPX7 (1m depth of water for 30 minutes). It can be used
in harsh outdoor environments, when hiking, mountain
biking, touring and alpine sports. |
| |
|
4-step RF power selection.
The IC-E92D provides 5W output
power both in VHF/UHF bands. The supplied BP-256
provides up to 6/5.5 hours of operating time. When you
don't need full power operation, you can reduce output
power to 2.5/0.5/0.1W for saving battery consumption. |
| |
|
Wide band receiver with
dualwatch capability.
The IC-E92D has dualwatch
receiver capability, allowing you to receive two bands
simultaneously (V/V, U/U, V/U possible). By pushing and
holding the [Main/Dual] button, you can easily turn
on/off the dualwatch mode, while a press of the button
allows you to toggle the active VFO channels. When in
the dualwatch mode, the operating frequency and mode are
restricted to 495kHz–999.990MHz in FM/WFM/AM mode (VFO
A) and 118–174MHz or 350–470MHz in FM/FM-N/AM/DV mode
(VFO B). |
| |
|
Large dot-matrix LCD.
Using a large full dot-matrix
LCD (37.8 20 mm), the IC-E92D clearly shows two line
frequency settings, alphanumeric channel name,
bandscope, received short data message and GPS
coordination, etc. You can change the display setting to
show frequency or memory name in the center of the
display. In addition automatic LCD and keypad backlight
provides bright illumination for night time operation. |
| |
|
Total 1304 memory channels.
The IC-E92D has a total 1304
memory channels with 26 memory banks. The VFO A has 800
regular channels, 50 scan edges and 2 call channels,
while the VFO B has 400 regular, 50 scan edges and 2
call channels. All memory channels, memory banks and
even scan edges can be named with 8-character channel
comments.
|
|
|
|
Simple bandscope.
Spectrum activity is visually
shown on the screen and AF output is emitted while
sweeping the range. It is useful for finding new or
interfering signals.
|
|
|
|
Keypad navigation.
The 4-direction cursor buttons
on the keypad gives you quick and intuitive access to
many settings. The twin volume/channel knob provides
convenient channel/volume setting.
|
|
|
|
External DC power jack.
An external DC power jack
allows for operation with an external DC power supply
(10–16V DC)When used with the CP-19, CP-12L or OPC-254L,
simultaneous operation during charging is possible.
|
|
|
|
Built-in CTCSS/DTCS encoder
and decoder.
CTCSS and DTCS tones are used
for accessing a closed repeater or tone squelch
operation. The pocket beep alerts you with a beep sound
when the transceiver receives a preset tone.
|
|
|
|
Multiple scan functions.
The IC-E92D supports various
scan types for maximum reception and ease of use.
• Full scan • Selected band scan • Programmed scan •
Memory scan
• Memory mode scan • All bank scan • Selected bank scan
• Tone scan
• Bank link scan (DMS) • Program scan link • Skip scan •
Priority scan
|
