|
ICOM IC-R2500
Wideband Mobile Receiver |
| |
|
ICOM IC-R2500 |
| |
|
The forthcoming IC-R2500
receiver is the advanced versions of the IC-R1500. The
IC-R2500 has two receiver circuits, which allow for
diversity reception and dual receive. Three optional
internal modules (UT-106 AF DSP unit, UT-108 DTMF
decoder or UT-118 D-Star digital voice decoder) are
available to provide extra receive capability
|
| |
|
Dualwatch capability.
The IC-R2500 is a dualwatch
receiver, which allows you to receive two channels
simultaneously. You can listen to FM, AM broadcasts TV
audio, HAM, CB, marine or other utility communications
while scanning or even listening to another channel.
|
| |
|
Wide LCD display.
Wide LCD display for
independent band control The wide LCD display shows both
main/sub band settings in an easy to read symmetric side
by side layout. The controller provides separate tuning,
volume, squelch knobs and function buttons for the left
(Main) and right (Sub) side bands. The LCD backlit
colour is selectable from amber and green. Select a
suitable colour for your lighting condition or your
preference. |
| |
|
1000 alphanumeric memory
channels.
1000 on-board memory channels
at the touch of a button! With Icom's Dynamic Memory
Scan, DMS, you have a versatile memory channel
management system at your command. The 1000 memory
channels can be arranged by service or personal
preference in the 21 memory banks. Selectively link the
channels together to scan depending on your needs.
Programming the memory channels and 6 character memory
names is simple with your PC. |
| |
|
60 channels per second scan.
Quickly scan through a band
with the IC-R2500's 60 Ch/second scan rate*. Program,
priority scan and various scanning modes are available.
|
| |
|
Standard Accessories.
Standard accessories for the
IC-R2500 include AC Adapter, controller cable (3.5m),
controller head, USB Cable, software CD and antenna. |
| |
|
Ideal for a wide range of
commercial and leisure users.
The IC-R2500 is ideal for the
scanner enthusiast looking for an advanced scanner with
more functionality and greater features. It is also
ideal for commercial/professional users looking for a
good value signal measuring device or authorities
looking for a spectrum surveillance device.
|
|
|
|
PC Requirements for
IC-PCR2500/R2500.
•Microsoft Windows
XP/2000/ME/98SE
•Intel Pentium 450MHz or faster (Pentium 4 recommended)
•Hard disk with at least 50 MB of free disk space
•At least 128 MB of memory (256MB or more recommended)
USB 1.1 or 2.0
•Display with 1024 x 768 pixel resolution, high colour.
|
|
|
Note:
CD-ROM or DVD drive is required for software
installation
USB audio dropouts or gaps may occur because of a lack
of PC power
Additional hard disk space is required for recording
sound or storing scope data
* This receiver consumes vehicle battery power in
stand-by mode. We advise you to turn off the main unit
power switch after use.
Microsoft and Windows are registered trademarks of
Microsoft Corporation. Pentium is a registered trademark
of Intel Corporation. |
