ICOM IC-T70E
VHF/UHF DUAL
BAND FM TRANSCEIVER
ICOM IC-T70E
5W of output power both VHF/UHF bands
The IC-T70A/E employs a new low
consumption current FET module and provides 5W of high
power and long operating time for both VHF and UHF
bands. For even longer operating
time, 2.5W or 0.5W of reduced output power settings can
be selected.
700mW loud audio
The IC-T70A/E
uses the BTL (bridge-tied load) amplifier that doubles
the audio output.
The 36mm large speaker delivers
700mW* of loud and intelligible audio.
(* Internal
speaker only)
IP54 rugged construction
While the IC-T70A/E is a compact unit
with a height of only 111mm, the dust protection
and water-resistance equivalent to IP54 provides
reliable operation in harsh environments.
Alphanumeric display
The 6-character
alphanumeric display clearly shows channel name,
operating
frequency and
memory number with bright illumination.
Three types of batteries to choose from
The IC-T70A/E has three types of
battery packs and case to choose from. Nickel metal
hydride (Ni-MH) battery pack, BP-264, Lithium-Ion
(Li-Ion) battery pack, BP-265, and battery case, BP-263
are selectable
for your preference.
External DC power source
An external DC
power jack allows charging the BP-264 (Ni-MH battery) or
operation with the BC-167S wall charger or external DC
power supply cables (CP-19R, CP-12L or OPC-254L). The
BC-167S* wall charger will be supplied depending on
version and charges the BP-264 battery pack in 8 hours
(approx). * Please note BC-167S wall charger cannot
charge BP-265 (Li-Ion battery).
A total of 302 memory channels
The IC-T70A/E has a total of 302
memory channels (including 250 regular channels, 50 scan
edges and 2 call
channels) with 26 memory banks. All memory channels,
scan edges and memory banks can be named with
6-character channel comments.
Integrated VOX function
The IC-T70A/E
has VOX (Voice Operated Transmit) function for
convenient hands-free operation with a compatible
optional headset and plug adapter cable. Also, the VOX
level and VOX delay time are adjustable.
Built-in CTCSS and DTCS
The CTCSS and
DTCS tones are built-in for quiet stand-by and repeater
access.
Pocket beep and tone scan are also
possible. The tone scan allows the operator to detect
the subaudible tone that is used for repeater access.
Multiple scan function
The IC-T70A/E
supports various scan types for maximum reception and
ease of use.
•
Full scan • Programmed scan • Program
link scan • Band scan • Memory scan • Bank scan • Bank
link scan • Skip scan • Duplex scan • Tone scan •
Priority scan
Other Features
• WX channel
receive and weather alert function (USA version
only)
• Power save
function
• SMA type
antenna connector
• Key lock
function
• Automatic
repeater function (USA version only)
• TOT (time
out timer) setting
• Repeater
lockout and busy channel lockout
• 1750Hz tone
for European tone access
• PC cloning
capability and transceiver-to-transceiver cloning
(Optional)
• Direct
keypad frequency entry
• 16 DTMF
autodial memories
• Auto power
off
• Wide/narrow
channel spacing