|
ICOM IC-V80E
VHF FM TRANSCEIVER
ICOM IC-V80E
5.5W of output power
The IC-V80/E employs a new low consumption current FET
module and provides 5.5W of high power and long
operating time. For even longer operating time, 2.5W or
0.5W of reduced output power settings can be selectable.
750mW loud audio
The IC-V80/E uses the BTL (bridge-tied load) amplifier
that doubles the audio output.
The 36mm large speaker delivers 750mW
of loud and intelligible audio*. Great in noisy
environments.
* Typical value using internal speaker.
IP54 and MIL-STD-810 rugged construction
While the IC-V80/E is a compact unit
with a height of only 112mm, the dust protection and
water-resistance
equivalent to IP54 provides reliable operation in harsh
environments. The IC-V80/E is tested to and has passed
11 categories of MIL-STD-810 environmental tests.
Alphanumeric display
The 5-character alphanumeric display
clearly shows channel name, operating
frequency and memory number with bright illumination. An
S-meter icon ( ) shows the signal strength of the
receiving frequency and output power level while
transmitting.
Three types of batteries to choose from
The IC-V80/E has three types of
battery packs and
case to choose from. Nickel metal hydride (Ni-MH)
battery pack, BP-264, Lithium-Ion (Li-Ion) battery pack,
BP-265, and battery case, BP-263 are selectable for your
preference.
The BP-264 battery pack,
BC-192 regular charger and BC-147S AC adapter will be
supplied depending on version.
A total of 207 memory channels
The IC-V80/E has a total of 207
memory channels, including 200 regular channels, 6 scan
edges and 1 call channel.
The channel name is programmable with 5 characters for
easy recognition.
Integrated VOX function
The IC-V80/E has VOX (Voice Operated Transmit) function
for convenient hands-free operation with a compatible
optional headset and plug adapter cable. Also, the VOX
gain and VOX delay time are adjustable.
Built-in CTCSS and DTCS
The CTCSS and DTCS tones are built-in for quiet stand-by
and repeater access.
Pocket beep and tone scan are also
possible. The tone scan allows the operator to detect
the subaudible tone that is used for repeater access.
Scan functions
Various scan functions including
program, memory, skip, priority and tone scan
can be programmed.
Other Features
•
WX channel
receive and weather alert function (USA version only)
•
Power save
function
•
BNC type antenna
connector
•
Automatic
repeater function (USA version only)
•
TOT (time out
timer) setting
•
Repeater lockout
and busy channel lockout
•
PC cloning
capability and transceiver to transceiver cloning
•
Direct keypad
frequency entry
•
DTMF memory
channels
•
Auto power off
•
Wide/narrow
channel setting
|
