|
Everything you expect in a
business radio... Plus Digital!
Non-slip, large PTT
The large PTT button is designed to provide non-slip,
confident-click, even wearing gloves.
800mW loud audio
The large 45mm speaker delivers up to 800mW* of loud
audio! Digital modulation adds distinct clarity to
received voices. * Typical with internal speaker.
Long lasting battery life The
IC-F3102D series has three types of battery packs and
case to choose from. Lithium-Ion (Li-Ion) battery pack,
BP-265, Nickel metal hydride (Ni-MH) battery pack,
BP-264 and battery case, BP-263 are selectable for your
preference.
|
Battery pack |
Type and capacity |
Operating time* (Approx.) |
|
BP-264 |
Ni-MH 7.2V
1400mAh |
12 hours |
|
BP-265 |
Li-Ion 7.4V
2000mAh (typ.) |
17.5 hours
|
* Conventional mode, Tx: Rx:
Standby=5:5:90.Power save function ON.
Channel announcement
When you rotate the channel knob, the radio announces
the channel number. Convenient for making radio
adjustments without having to look at the radio.
Bright 3-Color LED The bright
LED shows the operating status: red for transmit, green
for listening, or orange for low battery, etc.
Hands-free operation
Optional headset with plug adapter cable OPC-2004
provides hands-free operation.
Built military rugged!
Okay to
use in the rain! Tested to IP54 and 11 categories of MIL
STD-810 F environmental tests.
Compact and light weight
58×111.5×36.5 mm
320g/310g with BP-265. (VHF/UHF)
IDAS™ digital mode operation
The IC-F3102D series provides basic operation in NXDN™
CAI-based IDAS digital mode. It is also compatible with
IDAS multi-site conventional and IDAS single-site
trunking. The following IDAS features are programmable.
• PTT ID (TX) •
Individual/Group call (TX)
• Block decode
• RAN (Radio Access Number)
• Radio check (RX)
• Stun/kill/revive (RX)
• Call alert (RX)
• Remote monitor (RX)
• Emergency (TX)
• Digital voice scrambler
• GPS (TX only with HM-171GP)
• TX: Transmit, RX: Receive
Built-in 2-Tone and 5-Tone (Analogue mode)
2-Tone and 5-Tone signalings give you selective calling,
quiet stand-by and other convenient functions. The radio
stun and kill functions disable a radio over the air and
the revive function restores the stunned radio.
Scan features The priority scan
allows you to monitor one or two priority channels while
scanning other non-priority channels. The transmit
channel and talk back functions allow you to make a
quick response while scanning.
Other features
• CTCSS/DTCS
encoder/decoder*
• BIIS PTT ID transmission*
• MDC PTT ID and emergency*
• DTMF autodial
• Low battery alert
• 2-step power save
• PC programmable
• Time out timer
• Talk around function
• Lone worker function
• Surveillance function
• Forced narrow function*
* analogue only |
