Simple, Affordable Radio over
The VE-PG2 is a Radio over IP
Gateway which connects an analog radio (repeater or
transceiver) with another radio over an IP network. By
interconnecting two or more radios over an IP network,
your communication range can be expanded.
This mode simply bridges two
VE-PG2's over an IP network. As shown in the figure
above, the Group A radio users and the Group B radio
users can talk to each other.
When the IP network system
is compatible with IP multicast technology, three or
more VE-PG2s can be connected in the bridge mode and the
IP packet data can be multi-casted in the system.
Selective call mode using a
In this mode, two or more
radios and PA systems can be connected to the IP
network. Program the VE-PG2s to assign a unique DTMF
code to each network connected radio and PA system.
As shown in the figure
above, the Group A radio user sends the DTMF code (1#)
to set up a call and the Group A and B radio users can
talk to each other.
Up to 500 DTMF codes can be
Up to three radios can be
connected to one VE-PG2
Optional connection cables
allow you to connect a transceiver or repeater easily
Audio input/output and relay
switch for public address, headset or external device
SNMP, SYSLOG, network
monitoring function and call logging
firmware update(Internet connection required)
can be passed the IP network*
*Analog signalling and data
transmission may not work under certain conditions.
Adjustments or changes in radio settings are typically
Rear panel view
1. Mode switch for firmware
2. DC input (AC adapter supplied)
3. Ground terminal
4. 10BASE-T/100BASE-TX Ethernet LAN port
5. Radio connection ports
6. Audio input/output ports
7. External equipment control ports
8. Initialization button (on the bottom panel)